Filter
Top Products
config system interface FortiGate Voice VoIP, PBX, and PSTN CLI Reference
FortiGate Voice Version 4.0 MR1 Administration Guide
58 01-410-112851-20100601
http://docs.fortinet.com/ • Feedback
config system interface
Use this command to allow traffic for the VoIP protocol, SIP, to flow on a specific interface.
Syntax
config system interface
edit <interface_name>
set voip {enable | disable}
end
execute pbx
Use this command to view active channels and to delete, list or upload music files for
when music is playing while a caller is on hold.
Syntax
execute pbx active-call <list>
execute pbx extension <list>
execute pbx music-on-hold {delete | list | upload}
execute pbx prompt upload ftp <file.tgz>
<ftp_server_address>[:port] [<username>] [password>]
execute pbx prompt upload tftp <file.tgz>
<ftp_server_address>[:port] [<username>] [password>]
execute pbx prompt upload usb <file.tgz>
<ftp_server_address>[:port] [<username>] [password>]
execute pbx restore-default-prompts
execute pbx sip-trunk list
busy-tone-length
<integer>
Enter a number that determines how logn the busy tone is
on.
No
default
busy-quiet-length
<integer>
Enter a number that determines how long the busy tone is
off.
No
default
codec {alaw | ulaw} Enter the Codec preference type based on the country. No
default
Variables Description Default
Variables Description Default
edit
<interface_name>
Enter the interface that you want to allow SIP traffic on. No
default
voip
{enable | disable}
Enable the VoIP SIP protocol for allowing SIP traffic on the
interface.
disable
Variables Description
active-call <list> Enter to display a list of the active calls being processed by the
FortiGate Voice unit.
extension <list> Enter to display the status of all extensions with SIP phones that have
connected to the FortiGate Voice unit.