Fortinet 4.0 MR1 IP Phone User Manual


 
FortiGate Voice VoIP, PBX, and PSTN CLI Reference config pbx extension
FortiGate Voice Version 4.0 MR1 Administration Guide
01-410-112851-20100601 51
http://docs.fortinet.com/Feedback
config pbx extension
Use this command to add SIP phone extensions to the FortiGate Voice unit.
Syntax
config pbx extension
edit <extension_number>
set attach {enable | disable}
set auto-delete {enable | disable}
set dialplan <dialplan_name>
set email <user_email>
set email-notify <user_email_address>
set first-name <first_name>
set last-name <surname_name>
set nat {no | yes}
set secret <user_password>
set type {conference | ivr | sip-phone}
set vm-secret <user_password>
set voicemail {enable | disable}
set max-msg <max_messages_ allowed>
end
Variables Description Default
edit <pbx_did_name> Enter the name for the Direct Inward Dial. No
default
external-line {fxo1
| fxo2 | fxo3 | fx04
| <voip_providers>}
Select one external system that can dial directly to an
extension. fxo1, fxo2, fxo3, and fx04 are the 4 PSTN
interfaces. <voip_providers> are the VoIP providers
added to the FortiGate Voice.
No
default
cid-number
<phone_number>
Enter the phone number dialed by a caller on the external
system.
No
default
extension
<extension_number>
Enter the FortiGate Voice extension number the call is
directed to.
No
default
comment
<comment_string>
Enter a description, if applicable, about the direct inward
dial configuration.
No
default
Variables Description Default
edit
<extension_number>
Enter the extension number. The extension number has to
match the config pbx global extension pattern.
No
default
attach
{enable | disable}
Enable the voicemail message as an attachment in an
email.
No
default
auto-delete
{enable | disable}
Enable to automatically delete voice mail. No
default
dialplan
<dialplan_name>
Enter the dial plan that you want to use for the extension. No
default
email <user_email> Enter the user’s email address. No
default
email-notify
<user_email_address>
Enter the email address of the user that will be used when
notifying them that they have a voicemail message.
No
default