Filter
Top Products
Example FortiGate Voice branch office configuration Adding extensions and configuring FortiFones for users behind a NAT device
FortiGate Voice Version 4.0 MR1 Administration Guide
01-410-112851-20100601 29
http://docs.fortinet.com/ • Feedback
set secret <password_str>
set dialplan Dial_Plan_1
set vm-secret <voicemail_password_str>
set email-notify enable
set attach enable
set nat yes
end
To configure FortiFones behind a NAT device on the internal network
The configuration for FortiFones behind a NAT device on the internal network is the same
as for FortiFones directly on the Internal network. See “To configure FortiFones on the
internal network” on page 27.
You may have to configure the NAT device to allow SIP sessions between the FortiFone
and the FortiGate Voice unit.
To configure FortiFones behind a NAT device on a remote network
The following steps describe how to configure a FortiFone on the remote network with
extension number 6010.
1 Connect and power on the FortiFone handset.
2 Connect to the handset web configuration interface.
The default web configuration interface address is http://192.168.0.1. To connect to this
address from a PC, your PC should have an IP address on the 192.168.0.0 subnet, for
example: 192.168.0.10/255.255.255.0.
The default Username is root. No password is required.
3 Go to Network > LAN Settings and set the IP Type to DHCP Client and select Submit.
4 Select Save & Reboot to save the IP addressing change.
5 Log into the FortiFone using the IP address it acquired from the DHCP server.
6 Go to SIP Settings > Service Domain and add the following configuration information:
Active On
Display Name The name to be displayed on the phone. This name is only
displayed on this phone. When this phone calls another phone
the name displayed is the First Name and Last Name added to
the FortiGate Voice Extension configuration.
User Name 6010
This is actually the Line Number or Extension Number and must
match the Extension Number added to the FortiGate Voice
Extension configuration for this phone.
Register Name 6010
The Register Name is used to authenticate the FortiFone and
must match the Extension Number added to the FortiGate Voice
Extension configuration for this phone. Both the User Name and
Register Name are required.
Register Password The Password added to the FortiGate Voice Extension
configuration for this phone. The Register Name and Register
Password are used to authenticate the phone with the FortiGate
Voice unit.
Domain Server Leave this field blank.
Not required since the configuration uses the FortiGate Voice
unit as a SIP proxy. This field is only used to add the phone to a
SIP service domain.