Cisco Systems SPA 525G Telephone User Manual


 
Installing Your Phone
Connecting Your Phone to the Computer Network
Cisco Small Business Pro IP Phone SPA 525G (SIP) User Guide 27
2
Connecting Your Phone to the Computer Network
Connecting Your Phone to the Wired Network
You connect your phone to the local network by using an Ethernet cable:
STEP 1 Plug the Ethernet cable into the back of the base station into the slot marked “SW.”
This port is labeled #4 on Figure 1 on page 22.
STEP 2 Plug the other end of the Ethernet cable into the appropriate device on your
network, such as a network switch.
Connecting Your Phone to the Wireless Network
NOTE The PC port is not supported in wireless operation. The PC port is only supported
in a wired operation.
NOTE: The Cisco SPA 525G provides a
second Ethernet port. You can connect a PC to
this port to provide network access to the PC.
This port is labeled #3 in the Cisco SPA 525G
IP Phone Connections graphic. This port cannot
be used when the phone is connected to the
network via the built-in Wireless-G client.