Filter
Top Products
Installing Your Phone
Before You Begin
Cisco Small Business Pro IP Phone SPA 525G (SIP) User Guide 21
2
Before You Begin
Before you install and connect your phone, verify with your System Administrator
(if applicable) that the network is ready for the phone, read the safety notices, and
make sure you have all the phone parts and documentation available.
Connecting the Handset
STEP 1 Find the longer end of the coiled phone cord. Insert it into the back of the phone
base in the slot marked with a phone symbol. This port is labeled #5 on the Cisco
SPA 525G IP Phone Connections graphic.
STEP 2 Insert the short end of the handset cord into the jack at the bottom of the handset
(not shown).
NOTE: The RJ-11 port marked “AUX” is
reserved for connection with the Cisco SPA
500S Attendant Console that works with the
Cisco SPA 525G. It is not for use as a telephone
line port.
!
CAUTION: Do not plug a telephone line cord
into the port marked “AUX.”