Filter
Top Products
Appendix B Assigning Dialogic Ports for a Dual Phone System Integration
B-2
Ericsson MD-110 Serial Integration Guide
OL-1290-01
To set the Port assignments in the Registry
Step 1 On the Cisco Unity server, click Start > Run.
Step 2 In the Open field, enter Regedit and press Enter. The Registry Editor appears.
Step 3 Go to HKEY_LOCAL_MACHINE\Software\ActiveVoice\MIU\1.0\
Initialization\ServiceProvider <x>, where <x> is a number.
You will find several subkeys with this name.
Step 4 Locate the subkey in which the value Service Provider Name is D41MT.TSP.
Step 5 In this subkey, in the Edit menu click New > DWORD Value. A new value
appears in the subkey.
Step 6 Enter the name DeviceID Lower Bound and press Enter.
Step 7 Double-click the DeviceID Lower Bound value. The Edit DWORD Value dialog
box appears.
Step 8 In the Value Data field, enter 1 and click OK.
Step 9 in the Edit menu click New > DWORD Value. A new value appears in the subkey.
Step 10 Enter the name DeviceID Upper Bound and press Enter.
Step 11 Double-click the DeviceID Upper Bound value. The Edit DWORD Value dialog
box appears.
Step 12 In the Value Data field, enter the number of Dialogic ports you want to assign and
click OK.
Step 13 Close the Registry Editor.
Step 14 For the settings to take effect, exit and restart the Cisco Unity software. For more
information, see Appendix A, “Exiting and Starting the Cisco Unity Software and
Server.”