Filter
Top Products
1-5
Ericsson MD-110 Serial Integration Guide
OL-1290-01
Chapter 1 Ericsson MD-110 Serial Integration
Configuring Cisco Unity for the Integration
Configuring Cisco Unity for the Integration
After ensuring that the Cisco Unity server is ready for the integration by
completing the appropriate tasks in Chapters 1 through 3 of the Cisco Unity
Installation Guide, perform the following procedures to confirm that the
integration is enabled and to enter the port settings.
To confirm that the integration is enabled
Step 1 On the Cisco Unity server, go to the Cisco Unity Administrator by doing one of
the following:
• In Internet Explorer, go to http://<server name>/web/sa.
• Double-click the desktop shortcut to the Cisco Unity Administrator.
Step 2 Go to System > Licensing > Licensed Features.
Step 3 In the Integration field, confirm that the setting is Serial for a single phone system
integration or Multiple Integrations for a dual phone system integration.
Step 4 If the setting is not Serial or Multiple Integrations, contact your sales
representative for the necessary system key.
Step 5 Go to System > Switch. Confirm that the settings match those in the following
table. If the settings are incorrect, integration features may not be enabled.
Step 6 Click the Save icon.
Table 1-1 Switch Settings
Switch Parameter Required Setting
Manufacturer Ericsson
Model MD110
Switch PBX Software Version All
Integration Serial