Filter
Top Products
A-1
Ericsson MD-110 Serial Integration Guide
OL-1290-01
APPENDIX
A
Exiting and Starting the Cisco Unity
Software and Server
Exiting the Cisco Unity Software
This section provides two procedures for exiting the software: from the
Cisco Unity server and from another computer.
To exit the Cisco Unity software from the Cisco Unity server
Step 1 If the system uses the automated attendant, route all calls to the operator.
Step 2 Log on to Windows as a Cisco Unity administrator.
Step 3 Right-click the Cisco Unity icon in the status area of the taskbar.
Step 4 Click Stop Cisco Unity. An “X” appears in the Cisco Unity icon when
Cisco Unity stops running.
Step 5 Press Ctrl-Alt-Delete, then lock or log off Windows to prevent access by
unauthorized users.
To exit the Cisco Unity software from another computer
Step 1 If the system uses the automated attendant, route all calls to the operator.
Step 2 Start Internet Explorer, and go to http://<Cisco Unity server name>/status. If
prompted, enter the name and password of a Cisco Unity administrator.