Filter
Top Products
Chapter 1 Ericsson MD-110 Serial Integration
Integration Overview
1-2
Ericsson MD-110 Serial Integration Guide
OL-1290-01
Requirements
The Ericsson MD-110 integration supports configurations of the following
components:
Phone System
• Ericsson MD-110
• Software level BC6 or later
• ICU card installed to provide the serial data port
• The serial data port in the phone system connected to a serial port (COM1 is
the default) on the Unity server with an RS-232 serial cable
• The voice messaging ports in the phone system connected to the voice cards
in the Cisco Unity server
• The phone system ready for the integration as described in the installation
guide for the phone system
Cisco Unity Server
• The Dialogic
®
D/41EPCI
™
, D/120JCT-LS
™
, or D/120JCT-Euro
™
voice
cards installed
• Cisco Unity installed and ready for the integration as described in the
Cisco Unity Installation Guide
Caution To prevent Windows from mistaking the serial connection for a serial mouse
when rebooting the Cisco Unity server, confirm that the Boot.ini file is set
according to instructions. Otherwise, the integration will not work properly.
For details on setting up the Boot.ini file, refer to “Installing Windows 2000
Server” in Chapter 3 of the Cisco Unity Installation Guide.
• A system key that enables the integration and the appropriate number of voice
messaging ports
• An available serial port (COM1 is the default)