Filter
Top Products
70 OL-19613-01
Setting Up Phones and Access Lists for Mobile Connect
When using Cisco Mobile Connect, you must add your mobile phone and other phones that you want
to use to make and receive calls using the same directory numbers as your desk phone. These phones
are called remote destinations. You can also define access lists to restrict or allow calls from certain
numbers to be sent to your mobile phone.
If you want to... Then do this after you log in...
Create an access list 1. Choose User Options > Mobility Settings > Access Lists.
2. Click Add New.
3. Enter a name to identify the access list and a description (optional).
4. Choose whether the access list will allow or block specified calls.
5. Click Save.
6. Click Add Member to add phone numbers or filters to the list.
7. Select an option from the Filter Mask drop-down list box. You can filter
a directory number, calls with restricted caller ID (Not Available), or
calls with anonymous caller ID (Private).
8. If you select a directory number from the Filter Mask drop-down list
box, enter a phone number or filter in the DN Mask field. You can use
the following wild cards to define a filter:
–
X (upper or lower case)—Matches a single digit. For example,
408555123X matches any number between 4085551230 and
4085551239.
–
!—Matches any number of digits. For example, 408! matches any
number starts with 408.
–
#—Used as a single digit for exact match.
9. To add this member to the access list, click Save.
10. To save the access list, click Save.