Filter
Top Products
18
Redial a Number
To redial the most recently dialed number:
• Lift the handset and press the Redial button.
• Press the Redial button to dial using the speakerphone. When the party answers, you must lift the handset to talk.
Hold a Call
To place a call on hold:
• Press the Hold button.
To retrieve a held call:
• Press the Hold button again.
Note Because the hold feature can generate music or a beeping tone, avoid using hold when dialed into a remote conference
system. Simple three-party conferences that are created locally on your phone can safely be placed on hold without
introducing music or beeps into the conference.
Mute a Call
To mute an active call so that the other parties cannot hear you speak:
• Press the Mute button. The Mute button automatically lights, indicating that the other party cannot hear you.
To disengage mute and rejoin the call:
• Press the Mute button again. If you are using mute along with speakerphone, lift the handset to speak to the other party.
Note The mute feature does not generate music or a beeping tone.
Manage Call Waiting
To select among calls waiting on the same line, use the Hold button.
Retrieve Voice-Mail Messages
To access voice messages:
• Press the Msgs button and follow the voice instructions.
When you have one or more new messages, the message-waiting indicator (MWI) light on your handset is lit if you have MWI
configured.
Setting and Adjusting Your Cisco Unified IP Phone
Adjust the Volume for the Current Call
Press the Up or Down Volume button to adjust the volume for the speaker or handset.