Filter
Top Products
13
Alternate Methods to End a Conference Call
Call initiators may use one of the following methods (Functionality will vary according to your system configuration.):
• To end the conference but remain connected to the most recent call, press the Confrn soft key. The older call is placed on
hold.
• To disconnect from the conference, hang up the handset. The other parties will remain on the conference call.
Program Personal Speed-Dial Buttons
Once an administrator has defined one or more speed-dial instances for a Cisco Unified IP phone, you can reprogram numbers
that are not locked or program numbers into an instance that has an empty dial string by following these steps:
1. Select an available phone line by lifting the handset, by pressing the NewCall soft key, or by pressing a line button. Listen
for the dial tone.
2. Press the pound key (#).
3. Press the Menu button, press 4 on the keypad for Speed Dial, and use the Navigation button to select the speed-dial button
that you want to program. A short beep confirms that you are starting to program this button.
4. Enter the speed-dial number. The digits will appear on the phone display when you are entering speed-dial numbers on a
Cisco Unified
IP Phone 7905G. Use the backspace (<<) soft key to erase digits that were entered incorrectly.
To remove a speed-dial number without replacing it with a new one, press the pound key (#).
5. Hang up the handset, or press a new speed-dial button and repeat the process.
Place a Call from Your Local Directory
To search your directory by name or phone number, perform the following steps:
1. Press the Menu button.
2. Press 2 on the keypad for Directories, or use the Navigation button to scroll through the menu. Press the Select soft key to
make your selection.
3. Press 5 on the keypad for Directory Services, or use the Navigation button to scroll through the menu. Press the Select soft
key to make your selection.
4. Press 1 on the keypad for Local Directory or use the Navigation button to scroll through the menu. Press the Select soft key
to make your selection.
5. Press the Up or Down scroll button to select a field. Use the keypad to enter the search data, namely, the first name, last
name, or number to be searched.
6. Press the Search soft key. The search results will be displayed.
7. Use the Up or Down scroll button to select an entry.
8. Press the Dial soft key to dial the number.
9. To exit the directory, press the Exit button.
Place a Call from Your System Speed-Dial Directory
To search your directory by name or phone number, perform the following steps:
1. Press the Menu button.
2. Press 2 on the keypad for Directories, or use the Navigation button to scroll through the menu. Press the Select soft key to
make your selection.
3. Press 5 on the keypad for Directory services, or use the Navigation button to scroll through the menu. Press the Select soft
key to make your selection.
4. Use the Navigation button to scroll through the menu. Press the Select soft key to make your selection, or
–
Press 2 on the keypad for local speed-dial.
–
Press 3 on the keypad for personal speed-dial. (Consult your administrator on the use of this soft key.)