Filter
Top Products
15
Use Audio Paging
Audio paging provides a one-way voice path to the phones that have been designated to receive paging. It does not have a
press-to-answer option.
To use the paging function for paging a group, perform the following steps:
1. Select an available phone line by lifting the handset, by pressing the NewCall soft key, or by pressing a button. Listen for
the dial tone.
2. Dial the designated paging group number.
Each idle IP phone that has been configured with the paging number automatically answers in speakerphone mode, and the
phone displays the caller ID.
3. When you finish speaking your message and hang up, the phones are returned to their idle states.
Activate Do Not Disturb (DND)
For visual call alerting and information without audible ringing, use DND. Calls receive normal call-forward-busy and
no-answer treatment.
To activate the Do-Not-Disturb feature, perform the following steps:
1. Press the more soft key to locate the DND soft key.
2. Press the DND soft key. A display text message will indicate that the phone is in Do-Not-Disturb mode.
Note Pressing the DND soft key immediately forwards the call to the call-forward destination set on the phone. If the
call-forward destination is not set, pressing the DND soft key will disable the ringer.
To deactivate the Do-Not-Disturb feature, repeat Steps 1 and 2.