Filter
Top Products
5-5
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Do Not Disturb
(DND)
When DND is turned on, either no audible rings
occur during the ringing-in state of a call, or no
audible or visual notifications of any type occur.
You can configure the phone to have a softkey
template with a DND softkey or a phone-button
template with DND as one of the selected features.
The following DND-related parameters are
configurable in Cisco
Unified Communications
Manager Administration:
• Do Not Disturb—This check box allows you to
enable DND on a per-phone basis. Use Cisco
Unified Communications Manager
Administration > Device > Phone > Phone
Configuration.
• DND Option—Choose “Call Reject” (to turn off
all audible and visual notifications), or “Ringer
Off” (to turn off only the ringer). DND Option
appears on both the Common Phone Profile
window and the Phone Configuration window
(Phone Configuration window value takes
precedence).
• DND Incoming Call Alert—Choose the type of
alert to play, if any, on a phone for incoming
calls when DND is active. This parameter is
located on both the Common Phone Profile
window and the Phone configuration window
(Phone Configuration window value takes
precedence).
• BLF Status Depicts DND—Enables DND status
to override busy/idle state.
For information about configuring, refer to Cisco
Unified
Communications Manager
Administration Guide, “Do Not Disturb” chapter.
Extension Mobility
Service
Allows a user temporarily to apply a phone number
and user profile settings to a shared Cisco Unified IP
Phone by logging into the Extension Mobility
service on that phone.
Extension Mobility can be useful if users work from
a variety of locations within your company or if they
share a workspace with coworkers.
For more information, refer to Cisco Unified
Communications Manager System Guide, “Cisco
Unified Communications Manager Extension
Mobility and Phone Login Features” chapter.
Group call pickup Allows a user to answer a call ringing on a phone in
another group by using a group pickup code.
For more information, refer to Cisco Unified
Communications Manager Features and Services
Guide, “Call Pickup” chapter.
Hold/Resume Allows the user to move a connected call between an
active state and a held state.
Requires no configuration, unless you want to use
music on hold; see
“Music on hold” in this table
for information.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference