Filter
Top Products
5-3
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Barge and (cBarge) Allows a user to join a non-private call on a shared
phone line. Barge features include cBarge and
Barge.
• cBarge adds a user to a call and converts it into
a conference, allowing the user and other parties
to access conference features.
• Barge adds a user to a call but does not convert
the call into a conference.
The phones support Barge in two conference modes:
• Built-in conference bridge at the target device
(the phone that is being barged). This mode uses
the Barge softkey.
• Shared conference bridge. This mode uses the
cBarge softkey.
For more information, refer to:
• Cisco Unified Communications Manager
Administration Guide, “Cisco Unified IP
Phone” chapter.
• Cisco Unified Communications Manager
System Guide, “Cisco Unified IP Phones”
chapter.
• Cisco Unified Communications Manager
Features and Services Guide, “Barge and
Privacy” chapter.
Block external to
external transfer
Prevents users from transferring an external call to
another external number.
For more information, refer to Cisco Unified
Communications Manager Features and Services
Guide, “External Call Transfer Restrictions”
chapter.
Busy Lamp Field
(BLF) speed dial
Allows a user to monitor the call state of a directory
number associated with a speed-dial button, call log,
or directory listing on the phone.
For more information, refer to Cisco Unified
Communications Manager Features and Services
Guide, “Presence” chapter.
Call display
restrictions
Determines the information that will display for
calling or connected lines, depending on the parties
who are involved in the call.
For more information, refer to:
• Cisco Unified Communications Manager
Administration Guide, “Cisco Unified IP
Phone Configuration” chapter.
• Cisco Unified Communications Manager
System Guide, “Understanding Route Plans”
chapter.
• Cisco Unified Communications Manager
Features and Services Guide, “Call Display
Restrictions” chapter.
Call Forward Allows users to redirect incoming calls to another
number.
For more information, refer to:
• Cisco Unified Communications Manager
Administration Guide, “Configuring
Directory Numbers” chapter.
• Cisco Unified Communications Manager
System Guide, “Cisco Unified IP Phones”
chapter.
• “Specifying Options that Appear on the User
Options Web Pages” section on page 5-12
Call park Allows users to park (temporarily store) a call and
then retrieve the call by using another phone in the
Cisco Unified Communications Manager system.
For more information, refer to Cisco Unified
Communications Manager Features and Services
Guide, “Call Park” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference