Filter
Top Products
3-7
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
Chapter 3 Setting Up the Cisco Unified IP Phone
Attaching the Cisco Unified IP Phone Expansion Module 7914
Attaching the Cisco Unified IP Phone Expansion Module 7914
The Cisco Unified IP Phone Expansion Module 7914 attaches to a Cisco Unified IP Phone 7960G to
extend the number or line appearances or programmable buttons on your phone. You can customize the
button templates for the Cisco
Unified IP Phone Expansion Module 7914 to determine the number of
line appearances and speed dial buttons. See the
“Modifying Phone Button Templates” section on
page 5-10 for details.
You can attach a Cisco Unified IP Phone Expansion Module 7914 to the Cisco Unified IP Phone 7960G:
• When you initially add the phone to Cisco Unified Communications Manager by selecting
7914
14-Button Line Expansion Module in the Module 1 or Module 2 fields and selecting the
appropriate expansion module firmware. See
Step 6 in the following procedure.
• After the phone is configured in Cisco Unified Communications Manager.
To configure the Cisco Unified IP Phone Expansion Module 7914 on the Cisco Unified IP Phone, follow
these steps:
Procedure
Step 1 Log in to the Cisco Unified Communications Manager Administration application.
Step 2 From the menu, choose Device > Phone.
The Find and List Phone window displays. You can search for one or more phones that you want to
configure for the Cisco
Unified IP Phone Expansion Module 7914.
Step 3 Select and enter your search criteria and click Find.
The Find and List Phone window reopens showing a list of the phones matching your search criteria.
Step 4 Click the IP Phone that you want to configure for the Cisco Unified IP Phone Expansion Module 7914.
The Phone Configuration window displays.
Step 5 Scroll to the Expansion Module Information section of the window.
Step 6 To add support for one expansion module, in the Module 1 field, select 7914 14-Button Line Expansion
Module.
To add support for a second expansion module, in the Module 2 field, select 7914 14-Button Line
Expansion Module.
In the Firmware Load Information section of the window, there are two fields for specifying the firmware
load for Modules 1 and 2. You can leave these fields blank to use the default firmware load.
Step 7 Scroll to the top of the window and click Update.
A message displays asking you to reset the phone for the changes to take effect. Click OK.
Step 8 Click Reset Phone for the changes to take effect.
Note Refer users to their Cisco Unified CM User Options web pages so that they can configure speed dial
buttons and program buttons to access phone services on the Cisco
Unified IP Phone 7914 Expansion
Module. See the
“How Users Subscribe to Services and Configure Phone Features” section on page A-2
for more details.