Filter
Top Products
CHAPTER
3-1
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
3
Setting Up the Cisco Unified IP Phone
This chapter includes this following topics, which help you install the Cisco Unified IP Phone on an IP
telephony network:
• Before You Begin, page 3-1
• Understanding the Cisco Unified IP Phone 7960G and 7940G Components, page 3-2
• Installing the Cisco Unified IP Phone, page 3-5
• Attaching the Cisco Unified IP Phone Expansion Module 7914, page 3-7
• Adjusting the Placement of the Cisco Unified IP Phone, page 3-8
• Verifying the Phone Startup Process, page 3-9
• Configuring Startup Network Settings, page 3-10
• Configuring Security on the Cisco Unified IP Phone, page 3-10
Note Before you install a Cisco Unified IP phone, you must decide how to configure the phone in your
network. Then you can install the phone and verify its functionality. For more information, see
Chapter 2, “Preparing to Install the Cisco Unified IP Phone on Your Network.”
Before You Begin
Before installing the Cisco Unified IP Phone, review the requirements in these sections:
• Network Requirements, page 3-2
• Cisco Unified Communications Manager Configuration, page 3-2
• Understanding the Cisco Unified IP Phone 7960G and 7940G Components, page 3-2