Filter
Top Products
5 Programming & Using the MDW 9040 Pocket Phone Setting or Changing Handset Settings
MDW 9040 Wireless Pocket Phone Installation and Use,
503-801-19052 Issue 2, February 2001
Features and Options
As you read the following information, refer to “A Flowchart for the Configuration, Options, and Test Mode
Display Screens” on page 59.
Configuration Menu Before you begin to use your MDW 9040 Pocket Phone, you must configure the
telephone for the following options accessed through the Configuration Menu:
• Registration
• Button Mapping
• Display
To access the Configuration Menu:
1 Press to enter Menu Mode.
The initial Menu screen displays.
2 Press the Select-Row ( ) button to move the arrow to Configuration.
3 Press the Softkey ( ) below Sel.
The initial Configure Menu screen displays.
Registering the
Handset to the Dual
Radio Module
The Registration feature under the Configure Menu allows you to register the handset
with its appropriate radio module. For detailed instructions on registering the handset
with the appropriate radio module(s), see the information included in Chapter 4,
“Registering the Pocket Phone to a Dual Radio Module.”
Button Mapping The Button Map feature under the Configure Menu allows you to map your MDW
9040 to the correct communications system. For information on Button Mapping, see
Chapter 6, “MDW 9040 Pocket Phone Compatibility.”
Options
Ä
Configuration
Test Mode
Sel Exit
Options
Configuration
Ä
Test Mode
Sel Exit
CONFIGURE MENU
Registration
Ä
Button Map
Sel More Back
Menu