Filter
Top Products
About the Handset Programming & Using the MDW 9040 Pocket Phone 5
MDW 9040 Wireless Pocket Phone Installation and Use,
503-801-190 Issue 2, February 2001 49
Adjusting the Volume
Control
The volume control is located on the side of the handset. The volume buttons are
marked with an arrow “
^
” (volume up) “v” (volume down). This control raises and
lowers the volume of the alerter and the receiver. There are eight incremental volume
levels. If the ringer is enabled on the user menu, the display indicates the current
volume level with arrows (>>).
Figure 18. Volume Control Buttons
•
To raise or lower the Alerter (or Ringer) volume: While the MDW 9040 is
awake but on-hook, press the “
^
” or the “v” button. Each time you press the “
^
”
or “
v” button, the handset makes a “chirping” sound, and the display shows the
current volume level.
Figure 19. Ringer Volume Level Display
• To raise or lower the volume of the Handset Receiver (or the Earpiece): While
the MDW 9040 is off-hook, press the press the “
^
” or the “v” button. Each time
you press the “
^
” or “v” button, the handset audio dial tone level changes, and the
display shows the current volume level. There are four ringer settings.
Figure 20. Receiver Volume Level Display
Muting the Handset or
Headset Microphone
To turn off the microphone associated with the handset or headset while the handset is
off-hook:
Press the Mute ( ) button on the side of the handset.
The microphone is turned off. The
icon lights.
Note: If you press a second time, the Mute function is turned off.
The Mute function is also turned off when the handset goes on-hook or if
the user changes to another line.
and v Volume Control Buttons
<
>
^
Ringer:>>>
5
1
A
6
2
B
7
3
C
8
4
D
Handset:>>>
5
1
A
6
2
B
7
3
C
8
4
D