Filter
Top Products
Setting or Changing Handset Settings Programming & Using the MDW 9040 Pocket Phone 5
MDW 9040 Wireless Pocket Phone Installation and Use,
503-801-190 Issue 2, February 2001 51
For example, to select an option on the handset display:
1 Press to enter Menu Mode.
The display shows the initial Menu screen.
2 Press the Select-Row ( ) button until the arrow is placed to the right of the
row on which the selected option is located. For example, press until the
arrow is placed to the right of Options as in the example above.
3 Press the Softkey ( ) below Sel (for Select).
Responding to the Last
Line on the Screen
On the bottom row of the screen, you may see Sel, More, or Exit/Back such as in the
following example:
These options indicate:
• Sel(ect) — you can select the currently highlighted option such as Ringer or
Vibrator by pressing the Softkey ( ) below Sel.
• More — there are more options than shown on the current screen. To see the next
screen of options, press the Softkey ( ) below More.
• Back— available on many screens, this option allows you to go back to the
previous screen.
• Exit — available on the initial Menu screen, this option allows you to exit Menu
Mode. When in Menu Mode, you can also exit by pressing the Menu button.
Menu
Options
Configuration
Test Mode
Sel
Exit
OPTIONS MENU
Ringer
Vibrator
Sel
Back
More