Aastra Telecom 53I IP Phone User Manual


 
Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
A-158 41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Appendix A
Expansion Module Key Settings for 536M (for all model phones)
and 560M (for 55i, 57i, 57i CT phones only)
Parameter
expmodX keyN type
Type
(in Web UI)
Aastra Web UI Operation->Expansion Module N
Configuration Files aastra.cfg, <mac>.cfg
Description The type of softkey to configure. Valid types are:
•none - Indicates softkey is disabled.
line - Indicates softkey is configured for line use.
speeddial - Indicates softkey is configured for speeddial use.
You can configure a softkey to speeddial a specific number by
pressing that softkey. Optionally, you can also configure a speeddial
key to dial prefix numbers. With this option, the prefix numbers
automatically dial when you press the softkey, and the phone waits
for you to enter the remaining numbers to dial out.
Note: When there is an active call, the speeddial keys send DTMF
digits through the active voice path. To dial out, you have to first put
the active call on hold and then press the speeddial key.
dnd - Indicates softkey is configured for do not disturb on the phone.
This option is "Do Not Disturb" in the Aastra Web UI).
blf - Indicates softkey is configured for Busy Lamp Field (BLF) use.
User can dial out on a BLF configured key.
list - Indicates softkey is configured for BLF list use. (This option is
BLF/List in the Aastra Web UI). User can dial out on a BLF List
configured key.
acd - (for Sylantro Servers only) Indicates the programmable key is
configured for auto call distribution (called “Auto call distribution” in
the Aastra Web UI). The ACD feature allows the Sylantro server to
distribute calls from a queue to registered IP phone users (agents).
dcp - (for Sylantro Servers only) Indicates the programmable key is
configured for either directed call pickup or group call pickup (called
Directed Call Pickup” in the Aastra Web UI). The Directed Call
Pickup/Group Call Pickup feature allows you to intercept or pickup a
call on a monitored extension or a group of monitored extensions.
xml - Indicates the softkey is configured to accept an XML application
for accessing customized XML services. You can also specify an XML
softkey URL for this option.
lcr - Indicates the softkey is configured for “last call return” when
pressed.