Filter
Top Products
Administrator Level Options
41-001160-00, Release 2.1, Rev 04 3-47
Administrator Options
Administrator Options
N/A Outbound Proxy
Server
sip outbound proxy
server
(global)
sip lineN outbound proxy
server
(per-line)
Address of the outbound proxy
server. All SIP messages originating
from the phone are sent to this
server. For example, if you have a
Session Border Controller in your
network, then you would normally
set its address here. Default is
0.0.0.0.
For more information, see Chapter
4, “Basic Network Settings” on
page 4-4.
N/A Outbound Proxy Port sip outbound proxy port
(global)
sip lineN outbound proxy
port
(per-line)
The proxy port on the proxy server
to which the IP phone sends all SIP
messages. Default is 0.
For more information, see Chapter
4, “Basic Network Settings” on
page 4-4.
Registrar Server Registrar Server sip registrar ip
(global)
sip lineN registrar ip
(per-line)
IP address of the SIP registrar. Up
to 64 alphanumeric characters.
Enables or disables the phone to be
registered with the Registrar. When
Register is disabled globally, the
phone is still active and you can dial
using username and IP address of
the phone. A message "No Service"
displays on the idle screen and the
LED is steady ON. If Register is
disabled for a single line, no
messages display and LEDs are
OFF.
For more information, see Chapter
4, “Basic Network Settings” on
page 4-4.
Registrar Port Registrar Port sip registrar port
(global)
sip lineN registrar port
(per-line)
SIP registrar’s port number. Default
is 0.
For more information, see Chapter
4, “Basic Network Settings” on
page 4-4.
Parameter In
IP Phone UI
Parameter in
Aastra Web UI
Parameters in
Configuration Files Description