Filter
Top Products
Configuration Server Protocol
4-82 41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Configuring the IP Phones
9
(Cont’d)
Reference: For more information on configuring the HTTPS security method, HTTP to HTTPS
redirect, and HTTPS server blocking for HTTP XML POSTs, see the section, “HTTPS Client/
Server Configuration” on page 4-23.
10 Press Done (4 times) to save the changes.
Note: The session prompts you to restart the IP phone to apply the configuration settings
11 Select Restart.
IP Phone UI
Step Action
HTTPS Settings
-Select HTTP Client.
-Select Download Server.
- Enter the IP address of the HTTPS server.
- Press Done.
-Select Download Path.
- Enter the HTTPS path name. If the IP phone’s configuration files and firmware files are
located in a sub-directory beneath the server’s HTTPS root directory, the relative path to that
sub-directory should be entered in this field.
- Press Done.
-Select HTTPS Server.
-Select HTTP->HTTPS.
- Press Change to select “Yes” or “No”. Default is “No”.
Enabling this feature redirects the HTTP protocol to HTTPS.
- Press Done.
-Select XML HTTP POSTs.
- Press Change to select “Yes” or “No”. Default is “No”.
Enabling this feature blocks XML HTTP POSTs from the IP Phone.