Filter
Top Products
Operational Features
41-001160-00, Release 2.1, Rev 04 5-173
Configuring Operational Features
Operational IP Phone Features
4In the "Number of Rings" field, enter the number of rings you want your phone to ring before the call
is forwarded.
Valid values are 1 to 9.
Note: "Number of Rings" field applies to No Answer and Busy No Answer modes only.
5 Click to save your changes.
For per-line configuration of call forwarding
6 Select a line to configure Call Forwarding on.
7 In the "Mode" field, select the mode you want to set on your phone.
Valid modes are:
•Off
•All
•Busy
• No Answer
• Busy No Answer
• Global
Notes:
1. To disable call forwarding in the Aastra Web UI, set the mode to OFF and remove the phone
number in the "Number" field.
2. To force a line to use the global settings, set the "Mode" field to Global.
8 In the "Forward Number" field, enter the destination number for which you want your calls on this
line to be call forwarded.
9 In the "Number of Rings" field, select the number of rings you want this line to ring before the call is
forwarded.
Valid values are 1 to 9.
Note: "Number of Rings" field applies to No Answer and Busy No Answer modes only.
10 Click to save your changes.
Aastra Web UI