Filter
Top Products
Operational Features
5-44 41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Operational IP Phone Features
Call Waiting Tone
You can also enable or disable the playing of a short “Call Waiting Tone" when
there is an incoming call on your phone. This feature is enabled by default. If you
have Call Waiting enabled, and a call comes into the line for which you are on an
active call, a tone is audible to notify you of that incoming call. The tone is also
audible to the caller to indicate to that caller you are currently on another call.
A User or Administrator can configure this feature. An Administrator can
configure this feature using the configuration files or the Aastra Web UI.
Configuring Call Waiting/Call Waiting Tone
Use the following procedures to configure the Call Waiting/Call Waiting Tone
features on the IP phone.
Note: The Call Waiting Tone feature works only if Call Waiting is
enabled.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Call Waiting
Settings” on page A-101.