Filter
Top Products
Operational Features
41-001160-00, Release 2.1, Rev 04 5-137
Configuring Operational Features
Operational IP Phone Features
Configuring Directed Call Pickup (DCP) Using the Aastra Web UI
(for Sylantro Servers)
Use the following procedure to configure Directed Call Pickup using the Aastra
Web UI. This procedure uses the 57i IP Phone as an example.
Aastra Web UI
1 Click on Operation->Softkeys and XML
or
Click on Operation->Programmable Keys
or
Click on Operation->Expansion Module <N>.
Depending on your phone-model, the key configuration screen displays. The 57i Key Screen is
shown as an example.
2 Select a key for which to configure Directed Call Pickup.
3 In the “Type” field, select Directed Call Pickup.
4 In the “Label” field, specify a name for this Directed Call Pickup softkey.
For example: DCP2200