Filter
Top Products
Setting Parameters in Configuration Files
A-4 41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Appendix A
Setting Parameters in Configuration Files
You can set specific configuration parameters in the configuration files for
configuring you IP phone. The aastra.cfg and <mac>.cfg files are stored on the
server. The aastra.cfg file stores global IP phone configuration settings. The
<mac>.cfg file stores configuration settings specific to the IP phone with that
MAC address. When you restart the IP phone, these files are downloaded to the
phone.
If you make changes to the phone configuration, the changes are stored in a local
configuration on the phone (not on the server).
Configuration changes made to the <mac>.cfg file override the configuration
settings in the aastra.cfg file.
Reference
For information about configuration file precedence, see Chapter 1, the section,
“Configuration File Precedence” on page 1-22.
This section includes the following types of configurable parameters:
• Operational, Basic, and Advanced Parameters on page A-5
• Mapping Key Parameters on page A-133
• Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
on page A-136
• Advanced Operational Parameters on page A-172
• Troubleshooting Parameters on page A-177
Note: Configuration parameters that you enter in the configuration files
are NOT case sensitive.