Filter
Top Products
Network Settings
41-001160-00, Release 2.1, Rev 04 4-9
Configuring Network and Session Initiation Protocol (SIP) Features
Configuring the IP Phones
• Secondary DNS
You can configure the network settings using the configuration files, the IP phone
UI, or the Aastra Web UI.
Note: If you disable DHCP on the phone, the phone uses the TFTP
protocol as the default server protocol. If you want to specify a different
protocol to use, see “Configuration Server Protocol” on page 4-79.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Network
Settings” on page A-6.
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2Select Administrator Menu.
3 Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4Select Network Settings.
5Select IP Address and enter the IP address of the phone.
6Select Subnet Mask and enter the subnet mask.
7Select Gateway and enter the gateway address.
8Select DNS and enter a Primary and/or Secondary DNS server.
9 Press Done to save the changes.
The IP phone is manually configured.