Filter
Top Products
Configuration Methods
41-001160-00, Release 2.1, Rev 04 2-13
Configuration Interface Methods
Configuration Interface Methods
Advanced Settings
The Advanced Settings section provides the following options:
Heading Description
Network Allows you to set Basic Network Settings, Advanced
Network Settings, Type of Service DSCP, and VLAN
settings.
(Applicable to Administrator Only)
Global SIP Allows you to set global Basic SIP Authentication Settings,
Basic SIP Network Settings, Advanced SIP Settings,
Real-time Transport Protocol (RTP) settings, and Autodial
Settings that apply to all lines on the IP phone.
(Applicable to Administrator Only)
Lines 1 through 9 Allows you to set per-line Basic SIP Authentication Settings,
Basic SIP Network Settings, Advanced SIP Settings,
Real-time Transport Protocol (RTP) settings, and Autodial
Settings that apply to specific lines on the IP phone.
(Applicable to Administrator Only)
Action URI Allows an administrator to specify a uniform resource
identifier (URI) that triggers a GET when certain events
occur.
(Applicable to Administrator Only)
Configuration Server Allows you to set the protocol to use on the configuration
server (TFTP (default), FTP, HTTP, or HTTPS), configure
automatic firmware and configuration file updates, enable/
disable auto-resync, and assign an XML push server list.
(Applicable to Administrator Only)
Firmware Update Allows you to manually perform a firmware update on the IP
phone from the configuration server.
(Applicable to Administrator Only)