Filter
Top Products
Personal Speed Dial Access Buttons 97
enabled, the parked call is forwarded to the call coverage point
configured for that phone.
Call Pickup and Bridged Line Calls
Call Pickup (both Directed and Group) allows a user to answer a call that
is ringing on another telephone.
For bridged calls, you enter the Call Pickup feature code (455 for
Directed) followed by the group security code and the extension of a
primary phone. The call stops ringing on all primary and secondary
phones when the call is picked up. You cannot enter the extension of a
secondary phone. Doing so returns an error, and the call keeps ringing on
all primary and secondary phones.
Attendant Console and Bridged Line Calls
The VCX administrator can map primary phone numbers and secondary
phone numbers to buttons on a VCX 3105 Attendant Console. In this
case, status lights on the Attendant Console show that the bridged line is
in use for primary and secondary phones.
Hunt Groups and Bridged Line Calls
A primary or a secondary phone can belong to a hunt group.
If a primary phone is a member of a hunt group, a call coming to the
hunt group rings on an SA line on the primary phone. A secondary phone
cannot receive a hunt group call directed to a primary phone.
Message Waiting Indication and Bridged Line Calls
A secondary phone displays the Message Waiting Indication (MWI) of the
primary phone (or phones).
Pressing the MSG button lists the mailboxes. You can press Up and Down
arrow keys to select a mailbox, then press the MSG button again to
connect to that mailbox.
Personal Speed Dial
Access Buttons
The VCX User Interface allows you to set up personal speed dial access
buttons using two method; by assigning the Personal Speed Dial
feature to an access button and by assigning the Call feature to an access
button.