Filter
Top Products
20 CHAPTER 2: VCX V7000 MANAGER’S TELEPHONE — MODEL 3103
Access buttons have these default settings:
1 Do Not Disturb — Enables the Do Not Disturb feature. See Activating
Do Not Disturb.
2 Call Forward — Allows you to forward calls to different destinations.
See
Call Forwarding.
3 Call Park — Allows you to place a call in a “holding pattern” and retrieve
it from any other telephone in the system. See
Call Park.
4 Personal Speed Dial 1 — See Speed Dialing.
5 Personal Speed Dial 2
6 Personal Speed Dial 3
7 Personal Speed Dial 4
8 Personal Speed Dial 5
Status Lights for
Access Buttons
An Access button that is set up for incoming and outgoing calls indicates
the status, as shown in
Table 3.
Table 3 Status Lights for Access Buttons
If the light is The line is
Off Available for use
Steady In use
Feature Options Your Manager’s phone provides a full range of features. You can access
some of these features (for example, call transfer) by pressing a dedicated
button. These features, and basic phone operations such as making and
answering calls, are described in
Chapter 3, Basic Telephone Operation.
You can access some Manager’s phone features by pressing the Features
soft button, as shown in Figure 3
. You can then enable a feature using
either of the following methods:
1 Press the Features soft button.
2 Enter the three-digit feature code on the keypad (see Feature Codes).
3 Enter any additional values following display panel prompts.