Filter
Top Products
54 CHAPTER 5: STANDARD FEATURES
Using the Telephone User Interface
You can control Caller ID settings using the Telephone User Interface by
enabling the appropriate feature.
To change the current setting using the Telephone User Interface, select
Features. Use the Scroll buttons to navigate through the features.
If Caller ID (Anonymous All) is disabled and you want to block your Caller
ID for the next call only:
1 Pick up the handset.
2 Select the Features soft button.
3 Use the Scroll buttons to navigate to Anonymous Next.
4 Press the Select soft button.
5 Dial the number. Your ID is not sent to the caller.
Using the VCX User Interface
You can control Caller ID settings using the VCX User Interface by
enabling the appropriate feature.
To change the current setting using the VCX User Interface:
1 Log into the VCX User Interface and select My Extensions and then
select the Button Mappings tab.
2 Select the 3103 Manager phone.
3 In any one of the top three Feature Type pull-down windows, set the
type to Anonymous All if you want to block your Caller ID for all calls, or
select Anonymous Next to block your Caller ID for the next dialed
number. These feature types are mapped to your phone’s Access buttons.
4 Click Save and log out.
5 To block Caller ID information for all calls, press the Access button
associated with Anonymous All. The LED will go on, indicating that the
feature is enabled.
6 To block Caller ID information for only the next dialed call, press the
Access button associated with Anonymous Next. The LED goes on,
indicating that you enabled the feature. When you complete the call, the
LED goes off.