Filter
Top Products
Speed Dialing 61
This section describes how to set up speed dialing through the Telephone
User Interface. You can also enable speed dialing through the VCX User
Interface. See Chapter 6
for information on accessing the VCX User
Interface; see the online Help for information on creating speed dials.
Note that the two interfaces are synchronized. A speed dial created or
modified in one interface appears in the other interface. A speed dial
deleted in one interface is deleted in the other interface.
Configuring Personal
Speed Dial Numbers
You set up speed dialing through the Telephone User Interface using the
Feature soft button. Refer to the chapter that describes the buttons and
controls on your phone for the location of the available speed dial Access
buttons.
To configure a speed dial number using the Feature soft button and the
Speed Dial menu:
1 Press Feature + 410.
The Main menu appears.
2 Press [3] to access the Speed Dial menu.
The Display Panel lists the first speed dial:
Speed dial 1:
If the speed dial is already configured, the Display Panels show the
configured number, for example:
Speed dial 1:
1001
To locate the speed dial number you want to configure, press the
speed dial number (1 through 9) or use the up and down scroll
buttons
If you assign a number to a speed dial that does not have a
corresponding Access button, you can speed dial the number only by
entering the appropriate feature code. Or you can scroll through the
display panel directory.
3 Press the Change soft button, then enter the number you want to
associate with this speed dial. Include all prefix numbers that you would
normally dial, such as a 9 or 8 or 1 to access an outside line, and, if
necessary, the country code or area code.
4 To store the number, press the Enter soft# button.