VTech DS6151 Cordless Telephone User Manual


 
53
Telephone operation
Edit a speed dial entry
Using the handset:
When the handset is not in use, press and hold the assigned number of
the desired speed dial entry.
When the desired entry appears, press the EDIT softkey. The screen
shows EDIT NUMBER.
Use the dialing keys (0-9) to edit the number.
Press OFF to backspace and erase a digit.
Press and hold OFF to return to the idle mode.
Press to move the cursor to the left or to the right.
Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears).
Press the NEXT softkey to move to the name. The screen shows
EDIT NAME.
Use the dialing keys (see page 47) to edit the name.
Press OFF to backspace and erase a character.
Press and hold OFF to return to idle mode.
Press on the handset to move the cursor to the left or to the right.
Press the SAVE softkey to save, then the screen shows the edited entry.
Press OFF to exit to the idle mode.
Using the telephone base:
When the telephone base is not in use, Press and hold the assigned
number of the desired speed dial entry.
When the desired entry appears, press the EDIT softkey. The screen
shows EDIT NUMBER.
Use the dialing keys (0-9) to edit the number.
Press CANCEL to backspace and erase a digit.
Press and hold CANCEL to return to the idle mode.
Press /CID to move the cursor to the left or /DIR to the right.
Press the PAUSE softkey to insert a dialing pause (a p appears).
Press the NEXT softkey to move to the name. The screen shows
EDIT NAME.
Use the dialing keys (see page 47) to edit the name.
Press CANCEL to backspace and erase a character.
Press and hold CANCEL to return to the idle mode.
Press /CID to move the cursor to the left or /DIR to the right.
Press the SAVE softkey to save, then the screen shows the edited entry.
Press CANCEL to exit to the idle mode.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.