VTech DS6151 Cordless Telephone User Manual


 
41
Telephone operation
Transfer a call (continued)
At the telephone base:
During a call, press HOLD and the outside call is put on hold. Press the
MENU softkey and then press /CID or /DIR
to select Intercom.
-OR-
During a call, press the OPTION softkey and the press /CID or
/DIR
to select Intercom. T
he outside call is put on hold automatically.
When you have only one system handset, your telephone base shows
Calling handset 1 and the handset rings and shows Base is calling.
-OR-
When you have more than one system handsets, your telephone base
shows
INTERCOM TO:, p
ress
/CID or /DIR
to select a destination
handset and then press the SELECT softkey. The telephone base shows
Calling handset X
. The destination handset rings and its screen shows
Base is calling.
To answer the intercom call on the destination handset, press , ,
or INT. The outside call is still on hold and both telephone base and the
destination handset now show Intercom. You can now have a private
conversation between the telephone base and the destination handset.
Press CANCEL or the END softkey on the telephone base. Both screens
show Intercom ended.
The telephone base and the destination handset show L1)ON HOLD if the
call is on line 1. Press on the destination handset to connect the call on
line 1. The same procedures apply if the call is on line 2.
1.
2.
3.
4.
5.
If you want to cancel an intercom call and reconnect to the outside call
before the destination handset answers, press the corresponding line button,
LINE 1 or LINE 2
,
on your telephone base.
If the destination handset does not answer the intercom call within 100
seconds, is in the directory or call log, or is out of range, your telephone
base shows Unable to call try again and the outside call is still on hold.
Press the corresponding line button,
LINE 1 or LINE 2
on your telephone
base to
reconnect to the outside call.