Filter
Top Products
www.uniden.com
GETTING STARTED [ 9]
GETTING STARTED
1) Press up on the latch and lift the battery cover.
2) Connect the battery pack connector observing correct
polarity (black and red wires) to the jack inside the battery
compartment.
Do not exert any force on this connection. It could cause damage to
the battery or handset. Once you are certain that you have made a
good connection, then insert the battery pack into the battery
compartment. Do not pinch the wires.
3) Insert the tabs of the cover into the slots of the battery
compartment and securely close the cover by pressing down.
4) Place the handset on the base.
• Use only the Uniden
(BT-905) rechargeable
battery pack supplied
with your cordless
telephone.
• Replacement batteries are
also available through
the Uniden Parts
Department at (800) 554-
3988, Monday thru Friday
from 8:00 a.m. to 5:00
p.m. or online at
www.uniden.com
• Recharge your phone on
a regular basis by
returning the handset to
the base after each
phone call.
m
i
c
B. Install the rechargeable battery pack into the handset
The handset is powered by a rechargeable battery pack.
The battery recharges automatically when the handset is placed on the base unit.
Charge the handset battery pack for at least 15-20 hours before using your new cordless
telephone for the first time!
To maximize the charge capacity of your battery pack, DO NOT
plug the telephone cord into the base unit and wall jack until the battery is fully charged.
EXAI398 2/5/3 4:11 PM Page 9