Filter
Top Products
www.uniden.com
[ 19 ]
MEMORY DIALING
BASICS
MEMORY DIALING
6) Use the number keys to enter the phone number.
The phone number cannot exceed 20 digits.
• Use
redial/pause to enter a pause in the dialing sequence.
The display shows a “
P”. Each pause counts as one digit and
represents a two second delay of time between the digits as they
are sent.
• Use
delete/channel to delete digits as needed.
7) Press
select. You will hear a confirmation tone and the following
display appears. Memory storage is complete. For example, if you
store a name and number into memory location number 7, the
display shows “
Memory 7 Stored”. After about 2 seconds,
“
Memory Store” is displayed.
Repeat steps 2 - 7 to store more numbers.
8) Press
end to return to standby mode.
Store Number
8007303456
Memory 7 Stored
Memory Store
7 Movies
8 (Memory 8)
• The pause feature is
useful for long distance
calling, credit card
dialing, or sequences
that require a pause
between digits.
• The pause key counts as
one digit. Pressing
redial/pause more
than once increases the
length of a pause
between numbers.
• The 10 memory
locations are
represented by the
numbers 0-9 on the
keys. If you store a
number in one of the
locations, then attempt
to store a different
number in the same
location later, the new
number will overwrite
the previous one.
EXAI398 2/5/3 4:12 PM Page 19