Filter
Top Products
www.uniden.com
THE INTEGRATED ANSWERING DEVICE[ 32 ]
Setting the Time
The clock on the cordless phone’s answering system starts when power is supplied to the base.
Follow these steps to set the clock to the correct time.
1) Press the menu/clock key.
The system announces “Time”, the current time and the guidance for
setting the time.
2) Press the
volume/select/ or volume/select/ key until the correct
day is announced. The numbers [ ] through [ ] are displayed on
the base.
3) Press the
set/ringer key to select the day.
4) Press the
volume/select/ or volume/select/ key until you hear
the correct hour setting. The numbers [ ] through [ ] are
displayed on the base as each hour is announced.
5) Press the
set/ringer key to select the hour.
6) Press the
volume/select/ or volume/select/ key until you hear
the correct minute setting. The numbers [ ] through [ ] are
displayed on the base as each minute is announced.
7) Press the
set/ringer key to select the minute.
8) Press the
volume/select/ or volume/select/ key until you hear
the correct AM or PM setting.
The message counter displays [ ] or [ ].
9) Press the
set/ringer key to select the AM/PM setting.
You hear a confirmation tone, then the announcement “Time” and the
time and day are announced for your review. After a few seconds, the
system announces “To set security code, press menu again”.
• Normally the idle time
for the menu mode is 10
seconds before the
system returns to
standby. However for
setting the time, the
idle time is extended to
two minutes.
• Press and hold the
volume/select/ or
volume/select/ to
quickly scroll through
the numbers on the
display.
EXAI398 2/5/3 4:12 PM Page 32