Filter
Top Products
www.uniden.com
[ 43 ]THE INTEGRATED ANSWERING DEVICE
ADDITIONAL
INFORMATION
Turn on the answering system remotely
If you have forgotten to turn on your answering system, you can turn it on remotely from any
touch-tone telephone.
1) Call your telephone number.
2) Wait ten rings until the system answers. You hear a beep.
3) Press
0 and then enter your PIN code. The answering system announces the current time and
the number of messages stored in memory. You hear “To play incoming messages, press zero
two. For help, press one zero”.
4) Press
0 then 6 to turn the answering system On. You hear the outgoing message and a
confirmation tone.
5) Hang up the phone and subsequent calls will be answered by the system.
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset and the base
unit. Normally, setting the code is not necessary. The first time you charge your handset, the
security code is automatically set.
In the rare situation that you suspect another cordless telephone is using the same security
code, you can change the code.
1) Remove the handset from the base unit. Press and hold the
find hs key on the base.
2) While holding the
find hs key, place the handset on the base unit, and leave the handset on
the base for more than 3 seconds. A new random security code is set.
Installing the Beltclip
To attach the beltclip
Insert the beltclip into the holes on each side
of the handset. Press down until it clicks.
To remove the beltclip
Pull both sides of the beltclip to release the
tabs from the holes.
• To protect you against
misbilled calls which
might result from your
phone being activated
by other equipment, the
phone has AutoSecure
TM
feature electronically
locks your phone when
the handset is on the
base. Also, the Random
Code
TM
digital security
which automatically
selects one of over
262,000 digital security
codes for the handset
and base.
• If the handset battery
pack is completely
discharged or the
battery pack is removed,
the digital security code
will be lost. If this
happens, a new security
code is set automatically
the next time the
battery pack is charged.
EXAI398 2/5/3 4:12 PM Page 43