Filter
Top Products
www.uniden.com
[ 33 ]
THE INTEGRATED
ANSWERING DEVICE
THE INTEGRATED ANSWERING DEVICE
Setting a Personal Security Code (PIN)
To play your messages from a remote location, you need to enter a two-digit Personal
Identification Number (PIN) code (01-99). To select a PIN, perform the
following steps:
1) Press the
menu/clock key twice in standby mode.
“Security code” and the current PIN code is announced as it is displayed on the base. Then
the system announces the guidance for setting the PIN code.
2) Press the
volume/select/ or volume/select/ key until the desired number appears.
3) Press the
set/ringer key to select the PIN code. You hear a confirmation tone, then the
announcement “Security code” and the new PIN code is announced. After a few seconds, the
system announces “To set ring time, press menu again”.
Setting the Ring Time
The ring time setting allows you to set the number of rings the caller hears before your
answering system plays the outgoing message. You can set the ring time to answer after two,
four, or six rings. Setting (Toll Saver), the answering system picks up after two rings if you
have new messages, and after four rings if there are none. This way, if you make a long distance
call to check your messages, you can hang up after the second ring to avoid billing charges.
1) Press the
menu/clock key three times in standby mode.
You hear “Ring time” and the current ring time (
[ ] 2, [ ] 4, [
] 6, [ ] Toll saver),
and it is displayed on the base. Then you hear the guidance for setting the ring time.
2) Press the
volume/select/ or volume/select/ key until the desired ring time appears.
3) Press the
set/ringer key to select the new ring time. You hear a confirmation tone, then the
announcement “Ring time” and the new ring time is announced. After a few seconds, the
system announces “To set record time, press menu again”.
The PIN code is set to “80”
when you purchase the
cordless phone.
EXAI398 2/5/3 4:12 PM Page 33