Filter
Top Products
www.uniden.com
[ 17 ]
BASICS
BASICS
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise increases.
If you pass the range limits of the base unit, your call will terminate within 5 minutes.
You must subscribe through your local telephone company to receive Call
Waiting Service.
Flash and Call Waiting
If you have "Call Waiting" service and a call waiting tone sounds
while you are on a call, press
talk/flash to accept the waiting call.
There is a short pause, then you will hear the new caller. To return to
the original caller, press
talk/flash again.
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the phone´s
channel for clear operation. This function works only when the phone is in use.
Press
delete/channel. “Scanning” appears on the display, indicating the phone is changing to
another channel. For more information on interference, refer to page 50.
Page
To locate the handset (while it's off the base), press find hs on the
base. The handset beeps for 60 seconds.
Paging is canceled when pressing any handset key,
find hs on the base
or the handset is returned to the base.
• The UltraClear Plus
TM
true compander circuitry
virtually eliminates
background noise. This
innovative technology,
together with 20
different channels,
provides you with the
best possible reception
during all your
conversations.
• Paging is also canceled
when the phone receives
an incoming call.
EXAI398 2/5/3 4:11 PM Page 17