Uniden EXAI398 Cordless Telephone User Manual


 
www.uniden.com
GETTING STARTED[ 10 ]
Battery use time (per charge)
From fully charged (15-20 hours charge time)
Up to seven hours continuous use during talk mode.
Up to fourteen days when the handset is in the standby mode.
Low battery alert
When the battery pack is very low and needs to be charged, the phone
is programmed to eliminate functions in order to save power. If the
phone is not in use,
Low Battery appears on the LCD and none
of the keys will operate.
If the phone is in use,
Low Battery flashes and the handset
beeps. Complete your conversation as quickly as possible and return
the handset to the base unit for charging.
m
i
c
The last number dialed in the redial memory and the numbers stored in
the memory locations are retained for up to 30 minutes while you replace
the battery pack.
Even when the battery
pack is not being used, it
will gradually discharge
over a long period of
time. For optimum
performance, be sure to
return the handset to the
base unit after a
telephone call.
Talk Mode -
The handset is off the
base and talk/flash has
been pressed enabling a
dial tone.
Standby Mode -
The handset is not in
use, off the base and
talk/flash has not been
pressed. A dial tone is
not present.
Cleaning the charging contacts
To maintain a good charge, it is important to clean the
charging contacts on both the handset and base unit once
a month. Use a dry cloth or pencil eraser to clean. If the
contacts become very dirty, using water only, dampen a
cloth to clean the charging contacts. Then make sure to
go back over the charging contacts with a dry cloth before
returning the handset to the base to charge.
EXAI398 2/5/3 4:11 PM Page 10