Filter
Top Products
www.uniden.com
MEMORY DIALING[ 18 ]
• In memory dialing
operation, you must
press a key within 30
seconds. Otherwise, an
error tone will sound
and the phone will
return to standby.
If you return the
handset to the base,
the phone will return
to standby also.
• You have 30 seconds
after pressing mem to
enter the number you
wish to store.
Otherwise, an error tone
will sound.
Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key presses. Your cordless
telephone stores up to 10 names/numbers in the handset.
1) Press and hold
mem until “Memory Store” is displayed.
2) Press the
vol/ring/ or the vol/ring/ key, or enter
a number (
0 - 9) to select the memory location where you would
like to store the number.
3) Press
select. The following screen appears and a cursor flashes
indicating that the display is ready for the name to be entered.
If this screen appears, the selected memory location is already stored.
Then you must either edit the entry in this location, delete the entry
in this location, or select “
Go Back” to choose another location.
4) To enter a name (up to 14 characters), use number keys.
• See the “Steps for Entering Names and Special Characters”.
(See page 20)
• Use
#/and
*
/tone
/
to move the cursor to the desired location.
• Use
delete/channel to delete characters as needed.
• Press and hold
delete/channel to delete all the characters.
• If a name is not required, go to step 5.
5) Press
select. “Store Number” is displayed.
The cursor flashes indicating that the display is ready for the number
to be entered.
Memory Store
1
2
Store Name
Edit Memory 1
Delete Memory 1
Go Back
Store Number
EXAI398 2/5/3 4:12 PM Page 18