Filter
Top Products
www.uniden.com
GETTING STARTED [ 13]
GETTING STARTED
Setting Menu Options
There are five setup options available. They are Caller ID options [AutoTalk, CIDCW (Caller ID on
Call Waiting), and Area Code], Dial Mode and Language.
AutoTalk allows you to answer the phone without pressing the
talk/flash
key
. If the phone rings
when AutoTalk is on, simply remove the handset from the base and the phone automatically
answers the call. If the phone rings when AutoTalk is off, you must press
talk/flash to answer
the call.
Caller ID options
To change your AutoTalk and CIDCW:
1) Press and hold
cid/menu. The following screen appears.
2) Use the
vol/ring/ or vol/ring/ key, or a number key
(1 and 2) to move the pointer to the selection that you would like to
change. Press
select to toggle between “On” and “Off” for Auto Talk and CIDCW.
3) Press
end and return the handset to the base unit to complete the setting. The handset
returns to the standby mode.
To enter your Area Code
If you enter a 3-digit area code number in the
Area Code option, your local area code does
not appear in Caller ID messages. Do not program this option, if your calling area requires
10-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit
number. For calls received from outside your local area code, you will see a full 10-digit number.
If your calling area requires 10-digit dialing, do not program this option.
1) When the phone is in the standby mode, press and hold
cid/menu. The following screen appears.
2) Press
3 or press the vol/ring/ key twice to select “Area Code”.
3) Press
select.
The cordless phone
features include
AutoTalk
TM
and
AutoStandby
TM
.
AutoStandby allows you to
hang up by simply
returning the handset to
the base.
EXAI398 2/5/3 4:11 PM Page 13