ADDITIONAL INFORMATION [48]
www.uniden.com
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom Suggestion
The charge/in use LED won't
illuminate when the handset is
placed in the base.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Make sure the handset is properly seated in the base.
• Make sure the charging contacts on the handset are clean.
The audio sounds weak and/or
scratchy.
• Move the handset and/or base away from metal objects or appliances and try again.
•Press the delete/channel key in the Talk mode to help eliminate background noise.
• Make sure that the handset is not too far from the base.
Can't make or receive calls. • Check both ends of the telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes. Then reconnect it.
• Change the digital security code (see page 43).
• Make sure that the handset is not too far from the base.
• Check the dialing mode used by your telephone company.
• Charge the handset.
ADDITIONAL
INFORMATION
UP033BH_EXI7246C.book Page 48 Wednesday, June 16, 2004 2:14 PM