Filter
Top Products
GETTING STARTED [26]
www.uniden.com
3) Press the mem key. You will hear a confirmation tone, and the
following screen appears.
Memory storage is complete.
After about 2 seconds, the following screen displays all the speed
dial memory entries.
4) Press the end key to exit memory setup mode. The phone returns to standby.
Storing Caller ID Messages in Speed Dial Memory
Messages (Caller ID names/numbers) shown in the Caller ID list can be stored in memory
dialing. For instructions on viewing the Caller ID Message list, see page 28.
1) Press the call id/menu key. Select the phone number to be stored
from the Caller ID list by pressing the /vol/ or /vol/ key.
2) Press the mem key.
3) Enter a number (0 - 9) or press the /vol/ or /vol/ key
to select the memory location to be stored.
4) Press the select key. You hear a confirmation tone, and the number
is stored in memory. The display returns to the Caller ID list.
If a message has already been stored in the selected memory
number location, a confirmation screen is displayed.
Press the /vol/ key to select
Yes. Press the select key to
overwrite. The display returns to the Caller ID list.
You cannot store a
Caller ID message if no
phone number appears
in the message.
note
GETTING STARTED
UP033BH_EXI7246C.book Page 26 Wednesday, June 16, 2004 2:14 PM