Filter
Top Products
[9] GETTING STARTED
www.uniden.com
C. Connect the Base, Set up the Outdoor Weather Sensor and Charge
the Handset
1) Connect the AC adapter to the DC IN 9V jack and to a
standard 120V AC wall outlet.
The base will attempt to contact the outdoor weather
sensor for five minutes after it is first connected.
Install the Alkaline batteries in the outdoor weather
sensor immediately after connecting the base to power.
2) Take off the knob on the back of the outdoor weather
sensor with a screwdriver or a coin. Remove the cover.
•Connect the AC adapter
to a continuous power
supply.
•Place the base unit
close to the AC outlet
to avoid long
extension cords.
•Use only the supplied
AD-314 AC adapter.
Do not use any other
AC adapter.
!
GETTING STARTED
UP033BH_EXI7246C.book Page 9 Wednesday, June 16, 2004 2:14 PM