Filter
Top Products
[23] GETTING STARTED
www.uniden.com
Programming Memory Locations/Caller ID/Speed
Dialing
The speed dial memory allows you to store up to 10 names and numbers in the handset. You
can dial these numbers with just a few key presses.
The speed dial memory is not limited to phone numbers. You can store any number (up to 20
digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
For example, you can save your bank account number to speed dial memory. When you call
your bank's telephone teller service and are prompted to enter your account number, simply
press the mem key and the speed dial number where you stored your account number. Then
press the select key.
Storing Names and Numbers in Speed Dial Memory
Entering letters and special characters
1) With the phone in standby mode, press the mem key.
2) Enter 0-9 to select the speed dial number where you would like to
store this entry. You can also scroll through the list with the /
vol/ and /vol/ keys. Press the select key twice.
3)
Store Name appears and a cursor flashes indicating that the
display is ready for the name to be entered.
When editing the speed
dial memory, you must
press a key within 30
seconds or the phone
will return to standby
mode. If you return the
handset to the base, the
phone will return to
standby mode also.
note
GETTING STARTED
UP033BH_EXI7246C.book Page 23 Wednesday, June 16, 2004 2:14 PM