Filter
Top Products
System & Station
Program 10-3 – System Assignments, Part 3 of 3
Strata DK Programming 5/00 3-35
System & Station
Program 10-3 – System Assignments, Part 3 of 3
Processor Type: DK14, DK40i, all RCTUs and BCUs
Program Type: System
Initialized Default: LEDs 11, 13 and 20 On, all other LEDs Off
Program 10-3 Overview
You can make the following system assignments with Program 10-3:
LED 20: SMDI Message Desk Number
For CO line calls answered by Voice Mail/Auto Attendant devices, either the three-digit CO line
number (001~200) or the Message Desk number (001) can be sent in the Message Desk fields of
the SMDI packet. The system distinguishes CO line number 001 from Message Desk number 001.
✱ ✱ ✱ ✱ 6SNU +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Button/
LED
X LED On LED Off
20
SMDI Message Desk Number (001) is sent in SMDI
packet.
CO line number is sent in SMDI packet.
19 Speed Dial Entry Timeout- 3 minutes Speed Dial Entry Timeout - 1 minute
18
Auto Attendant: Normal Ringing Pattern After Camp-
on
Auto Attendant: Back to Announcement After Camp-on
17 Auto Attendant: Ring Before Disconnect time Auto Attendant: Ring Before Disconnect time
16 Auto Attendant: Ring Before Disconnect time Auto Attendant: Ring Before Disconnect time
15 Auto Attendant: Sends MOH to Caller Auto Attendant: Sends RBT to Caller
14
SMDI-Bellcore Standard VM Interface, per LED 09
Below
Not used
13 SMDI-Station Number Digit Length (HEX-8) SMDI-Station Number Digit Length (HEX-0)
12 SMDI-Station Number Digit Length (HEX-4) SMDI-Station Number Digit Length (HEX-0)
11 SMDI-Station Number Digit Length (HEX-2) SMDI-Station Number Digit Length (HEX-0)
10 SMDI-Station Number Digit Length (HEX-1) SMDI-Station Number Digit Length (HEX-0)
09 Bellcore Standard 1985 Version (1-space) Bellcore Standard 1985 Version (2-space)
08 Caller ID/ANI numbers are sent out the SMDI port Caller ID/ANI numbers are not sent out the SMDI port.
07
06
05
04
PEKU Ports 33, 34-Amp, connected (RCTUBA/BB
or higher)
PEKU Ports 33, 34-stations connected
03 PEKU Ports 25, 26-Amp, connected PEKU Ports 25, 26-stations connected
02 PEKU Ports 17, 18-Amp, connected PEKU Ports 17, 18-stations connected
01 PEKU Ports 09, 10-Amp, connected PEKU Ports 09, 10-stations connected
SELECT = 3 Light the LED Buttons that are marked with an X in
the table below.