Toshiba DK40I Telephone User Manual


 
System & Station
Program 05 Flexible Access Code Numbering
Strata DK Programming 5/00 3-21
System & Station
Program 05 Overview
Program 05 enables you to change feature access codes. The first digit of a feature access code can
be changed to a different digit or to two digits. Digits after this prefix cannot be changed. Some
access codes cannot be changed (such as the code for Automatic Callback) and are shown with
N/A on the record sheet.
Notes
Access code conflicts may exist if new access codes are assigned, and a new system
numbering plan will have to be implemented.
Be sure access code changes do not conflict with existing access code or station numbering
schemes. Refer to Program 04 Port/Station Number Assignment.
If access codes are being changed to a number that is currently assigned, change the currently
assigned code to an unused code first. In the initialized state, the only unused code is zero (0).
5
Call Pickup Station (#5+Station No.), Ringing CO or
DID line (#59)
Directed Pickup of CO Line on Hold (#5+#7 XXX,
XXX = 001~200),
Pick-up External Page (#5 +#30 or for Zone Page
#5+#35~#38)
#5#79 Pick up Tandem Connection (Release 3.2 and
above)
Selected Group Pickup (#5+#320~#339)
Own Group(s) Pickup (#5+#34)
Pickup Ringing Line (#59)
[DN] Pickup #5#2+XXX (XXX=[PDN] or [PhDN], DK
Release 3.1 and above)
Verified Account Codes (DK14, DK40i, RCTUA~C/D:
Speed Dial + 50; RCTUE/F, B5CAU/BU Speed Dial +
050)
6
Call Forward (#601, #602, #603, #604)
Timed Reminder (#605~#609)
M/W for Voice Mail On (#63+Station No.)
M/W for Voice Mail Off (#64+Station No.)
Voice Mail ID Code Set (Call Fwd, #656)
Voice Mail ID Code Set (Ans. MW, #657)
LCD Message Set (#68)
DKT Mute Ring Adjust (#6101)
DKT Ring Level Adjust (#6102)
Port Swap/Station Relocation Off (#6281)
Station Relocation On (#6282)
Logical Port Swap On (#6283)
Call Forward Ext Set or Remote Change Code (#670)
Date Set (#651)
Time Set (#652)
Weekday Set (#653)
T.R. Override Code Change (#654, #655)
System Speed Dial
(N/A 600~699 RCTUB, RCTUBA/BB, RCTUC/D, and
B1CU, B2CAU/BU, B3CAU/BU)
System Speed Dial Set (N/A 60~99 - DK14, DK40i
and RCTUA)
LCD User Name (#621-Set, #620-Reset, TR dial plan
Set #650 +6267 +7/8/9 Change
DISA Security Code Change (#658)
Verified Account Code Change (#659)
Set LCD Messages (#68)
System LCD Messages (N/A 60-99)
Traveling Class Code 1~8 Change (#691~#698)
Logical Port Swap (#627 + Destination Intercom No.)
Physical Port Calling (#629 + Physical Port No.)
Message Waiting Set/Cancel (N/A) (7) (77)
Night Lock Password Change (#622)
7
CO Line Outgoing Calls (#7001~#7200)
To store a CO line or feature access code in Speed Dial memory from rotary telephones or telephones without
the Speed Dial and Redial buttons, enter 44 + 7XXX instead of # + 7XXX.
8
CO Group Outgoing Calls (801~816)
Default Distributed Hunt [DNs] (850~ 865)
See Program *04
9
Least Cost Routing or CO Group (9), Distributed Hunt Group Prog *04 Port Ref. (900~915)
Default
Access
Code
Features Affected
(N/A = Not Affected/ Cannot Change)
New
Access
Codes